Foam for cleaning barrels RecOil 500ml.

Recoil bore cleaning foam (Netherlands) comes in a 500 ml aerosol can. The product is designed to clean the internal surface of the gun barrel right after use. According to the manufacturer's recommendations, the foam is sprayed into the bore from the chamber side, and after the reaction is complete, cleaning is done using patches without additional effort. The foam formula effectively removes powder fouling, copper and brass particles left in the bore after contact with bullet jackets. The thick consistency ensures the foam stays on the metal surface for a long time, while the high pressure in the can helps the foam penetrate even small recesses. The product contains no ammonia, and no resinous residue remains on the metal surface after use, so no additional cleaning products are required.

The Recoil degreasing gun cleaner is designed to remove stubborn organic and inorganic contamination from firearm components. The product comes in a 500 ml aerosol can equipped with an applicator. It is primarily intended for cleaning and degreasing metal. The chemical formula does not contain aggressive components capable of damaging plastic, wood or rubber seals. Before use, the manufacturer recommends testing a small amount of the product on the material to check the reaction. The high pressure in the can ensures the cleaner penetrates even hard to reach places. When applied, the product fully displaces moisture, providing additional corrosion protection. After cleaning a firearm with Recoil, the manufacturer recommends applying dry teflon grease or gun oil to the metal.